------------------------------------
------ DCB Hardware validator ------
------------------------------------

* Testing MODEL:
 + Reading model from /etc/datik/config/dcb_model:
   - PASS: dcbt
* Testing MAC:
 + Reading MAC from /sys/class/net/eth0/address:
   - PASS: 00:05:f3:01:6e:16
* Testing VERSION:
 + Reading version from /etc/datik/VERSION:
   - PASS: 3.8.2
* Testing CONFIGURATION:
 + Reading configuration from /etc/datik/config/sysconfig/done:
   - PASS: iov (configured at 2024/06/21 06:35)
* Testing GPS:
 + Connection with core-gnss:
   - PASS: 43.2182 N,-2.72561 W ; 2026-03-27 08:26:59 ; Satellites:16
* Testing CONNECTIVITY:
   - INFO: Internet connectivity OK via ppp0
* Testing CELLULARCONNECTIVITY:
 + Checking PPP interface:
   - PASS: 'ppp0' is up. & APN is:dcb
   - INFO: Internet connectivity OK. SIMID: 89314404001285911318 & APN is: dcb
* Testing ROUTERCONNECTIVITY:
 + Checking ping to router IP:
   - ERROR: Router with IP '192.168.10.1' cannot be reached.
* Starting CAN tests for: can2 can1
* Testing CAN can1 bus:
 + Launching traffic test on 'can1' :
   - PASS: can1 Traffic OK and SEEMS to be FMS. Spe:0.160156km/h; Odo:66866.97km; Tº:9.875ºC; Tank/SOC:30.6%; 
* Testing CAN can2 bus:
 + Launching traffic test on 'can2' :
   - ERROR: can2 No traffic.
 + Launching CANDUMP test on 'can2' (5 seconds TMO) :
   - ERROR: can2 exit by TMO.