------------------------------------
------ DCB Hardware validator ------
------------------------------------

* Testing MODEL:
 + Reading model from /etc/datik/config/dcb_model:
   - PASS: dcbt
* Testing MAC:
 + Reading MAC from /sys/class/net/eth0/address:
   - PASS: d0:63:b4:03:8e:1b
* Testing VERSION:
 + Reading version from /etc/datik/VERSION:
   - PASS: 3.8.2
* Testing CONFIGURATION:
 + Reading configuration from /etc/datik/config/sysconfig/done:
   - PASS: iov (configured at 2023/11/12 14:28)
* Testing GPS:
 + Connection with core-gnss:
   - PASS: 44.722 N,10.6435 E ; 2026-03-20 07:17:02 ; Satellites:18
* Testing CONNECTIVITY:
   - INFO: Internet connectivity OK via ppp0
* Testing CELLULARCONNECTIVITY:
 + Checking PPP interface:
   - PASS: 'ppp0' is up. & APN is:dcb
   - INFO: Internet connectivity OK. SIMID: 89314404000753017012 & APN is: dcb
* Testing ROUTERCONNECTIVITY:
 + Checking ping to router IP:
   - ERROR: Router with IP '192.168.10.1' cannot be reached.
* Starting CAN tests for: can2 can1
* Testing CAN can1 bus:
 + Launching traffic test on 'can1' :
   - PASS: can1 Traffic OK and SEEMS to be FMS. Spe:39.941406km/h; Odo:200920.375km; Tº:9.6875ºC; Tank/SOC:28.2%; 
* Testing CAN can2 bus:
 + Launching traffic test on 'can2' :
   - ERROR: can2 No traffic.
 + Launching CANDUMP test on 'can2' (5 seconds TMO) :
   - ERROR: can2 exit by TMO.