------------------------------------
------ DCB Hardware validator ------
------------------------------------

* Testing MODEL:
 + Reading model from /etc/datik/config/dcb_model:
   - PASS: dcbt
* Testing MAC:
 + Reading MAC from /sys/class/net/eth0/address:
   - PASS: d0:63:b4:06:7f:44
* Testing VERSION:
 + Reading version from /etc/datik/VERSION:
   - PASS: 3.8.2
* Testing CONFIGURATION:
 + Reading configuration from /etc/datik/config/sysconfig/done:
   - PASS: iov (configured at 2025/03/21 06:19)
* Testing GPS:
 + Connection with core-gnss:
   - PASS: 42.73 N,-8.65496 W ; 2026-03-22 07:33:09 ; Satellites:15
* Testing CONNECTIVITY:
   - INFO: Internet connectivity OK via ppp0
* Testing CELLULARCONNECTIVITY:
 + Checking PPP interface:
   - PASS: 'ppp0' is up. & APN is:dcb
   - INFO: Internet connectivity OK. SIMID: 89314404001276130548 & APN is: dcb
* Testing ROUTERCONNECTIVITY:
 + Checking ping to router IP:
   - ERROR: Router with IP '192.168.10.1' cannot be reached.
* Starting CAN tests for: can2 can1
* Testing CAN can1 bus:
 + Launching traffic test on 'can1' :
   - PASS: can1 Traffic OK and SEEMS to be FMS. Spe:57.519531km/h; Odo:7831.16km; Tº:10.5ºC; Tank/SOC:36.4%; 
* Testing CAN can2 bus:
 + Launching traffic test on 'can2' :
   - PASS: 2: can2: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10
2: can2: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10
can2 Traffic OK and does NOT seem to be FMS.